Stainless Bros 3.5in Diameter 1.5D / 5.25in CLR 45 Degree Bend 16GA Wall - Leg
$44.99
STB601-08926-4150
Fabrication
Steel Tubing
Under $100
Stainless Bros 3.5in Diameter 1.5D / 5.25in CLR 45 Degree Bend 16GA Wall - Leg
Stainless Bros 2.50in Diameter 1.5D / 3.75in CLR 90 Degree Bend Leg Mandrel Bend
$25.49
STB601-06356-4150
Fabrication
Steel Tubing
Under $100
Stainless Bros 2.50in Diameter 1.5D / 3.75in CLR 90 Degree Bend Leg Mandrel Bend
Stainless Bros 1.50in Diameter 1.5D / 2.25in CLR 180 Degree Bend 6in Leg / 6in Leg Mandrel Bend
$31.49
STB601-03896-1150
Fabrication
Steel Tubing
Under $100
Stainless Bros 1.50in Diameter 1.5D / 2.25in CLR 180 Degree Bend 6in Leg / 6in Leg Mandrel Bend
Stainless Bros 1.50in Diameter 1D / 1.50in CLR 90 Degree Bend No Leg Mandrel Bend
$9.99
STB601-03856-3100
Fabrication
Steel Tubing
Under $100
Stainless Bros 1.50in Diameter 1D / 1.50in CLR 90 Degree Bend No Leg Mandrel Bend
Russell Performance -6 AN to 1/4in NPT Straight Flare to Pipe (Black)
$6.95
RUS660443
Fabrication
Fabrication
Fittings
Under $100
Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in...
Russell Performance M14 x 1.5 to -6 Flare (Pumps with 1/2in-20 Inverted Flare Thread)
$9.95
RUS640820
Fabrication
Under $100
Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in...
Russell Performance -6 AN ProClassic Black Hose (Pre-Packaged 20 Foot Roll)
$151.95
RUS632093
Fabrication
Hoses
For racers and performance enthusiasts who want high quality plumbing that is lighter and easier to assemble than traditional braided steel hose, Russell ProClassic...
Russell Performance -8 AN Twist-Lok Straight Hose End
$8.95
RUS624023
Fabrication
Fabrication
Fittings
Under $100
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok...
Radium RB26DETT Valve Cover Intake and Exhaust 12AN Male Press-Fit Fitting
$59.95
$56.95
RAD20-0809
Fabrication
Under $100
Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.
Radium Engineering V2 Quick Connect 19mm Male to 10AN Male Straight
$39.95
$37.95
RAD20-0758
Fabrication
Under $100
Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.
Radium Engineering Universal Check Valve Kit 8AN
$59.95
$56.95
RAD20-0534-08
Fabrication
Under $100
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Engineering Fuel Cell Vent Kit - 8AN
$59.95
$56.95
RAD20-0484-08
Fabrication
Fuel Lines
Under $100
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
