VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercoo – StangMods LLC
CALL 678.674.5537 or EMAIL Admin@stangmods.com
×
VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)
VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)
VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)
VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)
VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)
Click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping on all orders

VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)

VMPVMP-APX031
In stock
$1,649.99
The ultimate in cooling for your 2020+ GT500 and 2023+ Raptor R with the 5.2 L...
Size Guide
$1,649.99

customers are viewing this product
VMP Performance 2020+ GT500 / 2023+ Raptor R 5.2L - Apex Race Intercooler (Lid Required)
The ultimate in cooling for your 2020+ GT500 and 2023+ Raptor R with the 5.2 L engine. VMP APEX PREDATOR LID REQUIRED VMP designed a larger intercooler lid to solve the cooling problems with the factory blower once and for all. This larger lid allows for bigger intercooler bricks and more airflow. The VMP by PWR '20+ GT500 5.2 L Apex Race Intercooler is the culmination of two years of intercooler design and testing. We recommend the race core for cars making over 900 rearwheel horsepower. Below 900 the less expensive street core may be used. Thicker is not always better, the race core is built slightly thinner than the street core for optimal placement from the SC discharge to the core, and the core to the lid. PWR's proprietary bar and plate design transfers heat so well the extra thickness is not necessary. Race core benefits: 28 FPI design for maximum heat removal 160 mm wide (stackup) for maximum air-flow vs 146 mm width of the 81 mm, Race Core 1 to 3/4" adapters included for stock water manifold or high-flow designs from VMP and others. Optimal placement from SC discharge port to core and core to lid

This Part Fits:

Year Make Model Submodel
2020-2022 Ford Mustang Shelby GT500
Read More
Read Less

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.

Returns Policy

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Shipping

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.Donec pretium egestas sapien et mollis. Pellentesque diam dolor cosmopolis etos lobortis.

Comodous: Comodous in tempor ullamcorper miaculis
Mattis laoreet: Pellentesque vitae neque mollis urna mattis laoreet
Divamus de ametos: Divamus sit amet purus justo
Molestie: Proin molestie egestas orci ac suscipit risus posuere loremous

Yes it is.

Please make sure that you follow below steps:

1/ Download the package from themeforest.net (the file is in zip format)

2/ Extract the file you've just downloaded.

3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.

To save your time and reach our support quickly, please follow below steps:

1/ Create a staff account for us (with Themes permission and Settings permission) http://docs.shopify.com/manual/settings/account/staff-members

2/ Capture screenshot or video for the issue you get.

3/ Specify which template and version you are using.

4/ Describe clearly how to reproduce the issue.

5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to support@halothemes.com

Yes, we will assist you to install the template if needed

Yes, we do. Please send your customisation requests to support@halothemes.com, we will give you our quote. Thank you.

Yes. You can turn on/off the animation in the Setting page.

Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).

Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.

The theme package includes theme source, Photoshop design files, sample data and manual guide.

That is not a problem. You just need to modify the width/height ratio in theme settings.

Customer Reviews

Your cart

×