Home > Drivetrain > Driveshafts >

Coast Driveline Ultra-Light Aluminum Driveshaft for 05-10 V6
Coast Driveline Aluminum Driveshaft 05-09 V6

Alternative Views:

Regular Price $769.99

Availability: Usually Ships in 1 to 2 Days
Product Code: 00907


Key Product Specs
Key Product Specs
  • Installing a lighter driveshaft results in reduced rotational mass, which in turn allows your engine to rev faster and your Mustang to become quicker! Developed to fill the needs of hardcore racers, the 05-09 V6 Mustang Ultra-light Aluminum Driveshaft is a simple bolt-in replacement for the heavy and awkward OEM steel driveshaft provided from the factory. This simple driveshaft modification will provide a noticeable performance improvement on any 05-10 Mustang and is much safer than the stock steel shaft on vehicles with significant horsepower upgrades.

  • The rotational effect of weight is magnified in a driveshaft but the ultra-lightweight construction of this aluminum driveshaft requires less energy to overcome its inertia, transferring more horsepower to the wheels. Constructed of tough, lightweight T6061 Aluminum tube, the Ultra-Light Aluminum will provide long-lasting performance. The driveshaft also features durable, rebuildable Dana Spicer 1330-series U-joints to handle maximum horsepower. Installation is a snap with the supplied aluminum adapter plate and factory Ford mounting bolts.

    Key Benefits:
  • Constructed of tough, lightweight T6061 Aluminum
  • Simple, direct bolt-on installation, with supplied adapter plate and included factory bolts
  • Half the weight, compared to the factory steel shaft
  • Dana Spicer 1330-series u-joints
  • Fully balanced and rebuildable
  • Stock driveshaft weighs 39 lbs - this driveshaft only weighs 17 lbs!

    Special Installation Notes:
  • Stock Ride Height Mustangs - Direct bolt-in installation, no modification required.

  • 1-2 Inch Lowered - E-Brake cable bracket must be moved 1.5 inches away from driveshaft tunnel to allow for clearance of driveshaft. Requires simple re-drilling of bracket bolt hole.

  • 2 Inch or More Lowered - E-Brake cable bracket must be moved (as explained above), and two small flanges of metal must be bent flat against the bottom of the vehicle. This is a 10 minute procedure which does not affect the structural integrity of the vehicle.

  • Fits all 2005-2010 Mustang V6s

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Drivetrain > Driveshafts