You are here: Home > Shop by Manufacturer > Steeda > Miscellaneous Steeda Parts
Sort By:
Page of 1
Steeda Oil Separator for 79-95 GT, 96-04 Cobra & 03-04 Mach 1 Steeda Oil Separator for 07-12 GT500 & 05-10 GT Steeda Belt Tensioner (07-14 GT500)
Reg. Price $83.45
Sale Price $73.45
Our Low Price $83.95
Regular Price $272.45
Sale Price $262.95
Steeda Oil Separator V8 Mustangs Steeda GT500 Oil Separator 555-3354 Steeda Belt Tensioner GT500
Steeda Atomic License Plate Steeda Windshield Decal Steeda Billet Oil Separator for 11-14 GT/Boss 302
Regular Price $23.60
Sale Price $13.60
Regular Price $34.95
Sale Price $37.95
Regular Price $119.95
Sale Price $109.95
Steeda Atomic License Plate Steeda Windshield Decal Steeda Billet Oil Separator for 2011+ GT
Steeda Embossed Emblem Steeda Speed Matters License Plate Frame Steeda 8MM Plug Wires for 84-93 5.0
Regular Price $23.70
Clearance Price $15.70
Regular Price $19.99
Sale Price $15.99
Regular Price $59.95
Sale Price $52.45
Steeda Embossed Emblem Steeda Speed Matters License Plate Frame Steeda 8MM Plug Wires for 84-93 5.0
Steeda 8MM Plug Wires for 96-98 GT Steeda 8MM Plug Wires for 94-95 GT & Cobra Steeda Billet Oil Separator for 79-15
Regular Price $131.13
Sale Price $125.95
Regular Price $61.13
Sale Price $52.45
Regular Price $119.95
Sale Price $109.95
Steeda 8MM Plug Wires for 96-98 GT Steeda 8MM Plug Wires for 94-95 GT & Cobra Steeda Billet Oil Separator for 2011+ GT
Steeda Supercharger Pulley Belt Steeda Supercharger Pulley Puller Tool (07-12 GT500) Steeda Charge Motion Plates for 05-08 GT
Our Low Price $89.99
Regular Price $169.95
Sale Price $165.95
Our Low Price $279.95
Steeda Blower Pulley Belt Shelby GT500 Pulley Puller Tool 555-3125 Steeda Charge Motion Plates
Required for installation of 2.81" Steeda blower pulley on 03-04 Cobra Steeda Supercharger Pulley Puller Tool for 07-12 GT500.  If you are swapping to a smaller pulley on your GT500 Mustang then you'll need Steeda's pulley puller tool. Part number 555-8902 will work on changing 07-12 GT500 supercharger pulley. Steeda's patented CNC machined billet charge motion plates are a superior upgrade for your Mustang. As used on Steeda's Q335 Mustangs, Steeda's plates are .070 larger than the O.E. plates and are a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence, and improving airflow in the intake path for more horsepower and torque!
Steeda Dual Magnet Coil Packs for 99-04 GT Steeda Shifter Base Bushing (11-14 Manual) Steeda Water Outlet Housing for all 79-95
Our Low Price $349.95
Regular Price $89.95
Sale Price $79.95
Regular Price $52.95
Sale Price $49.95
Steeda Mustang Coil Packs Steeda Shifter Base Bushing for 11'-12' Mustangs Steeda Water Outlet Housing for all 79-95
Dramatic increase in spark energy is what you get with Steeda's patented dual-magnet coil packs. Replace the coil packs on your 99-04 GT for better spark and more horsepower. Sold in sets of 8 and replaces the coil packs on all 99-04 Mustang GT. These Steeda water outlet housings from StangMods eliminate the thermostat and allow a 16 AN coolant hose to attach to the water outlet. Steeda manufactures these housings from quality CNC-machined aluminum to ensure a proper fit. 070-01280.
Steeda Speedo Recalibration Gears for 79-98 Steeda Engraved Red Aluminum Radiator Bracket for 87-93 Steeda Engraved Blue Aluminum Radiator Bracket for 87-93
Regular Price $39.95
Sale Price $19.95
Regular Price $99.95
Sale Price $70.30
Regular Price $99.95
Sale Price $70.30
Steeda Speedo Recalibration Gears for 79-98 Steeda Engraved Red Aluminum Radiator Bracket for 87-93 Steeda Engraved Blue Aluminum Radiator Bracket for 87-93
555-0602 Steeda Engraved Red Aluminum Radiator Bracket for 87-93. Add Style & beauty with Steeda's lightweight,  engraved radiator bracket for your 87-93 Mustang. Made right here in the USA. 555-0604 Steeda Engraved Blue Aluminum Radiator Bracket for 87-93. Add Style & beauty with Steeda's lightweight,  engraved radiator bracket for your 87-93 Mustang. Made right here in the USA.
Steeda Engraved Black Aluminum Radiator Bracket for 87-93 Steeda Non-Engraved Polished Aluminum Radiator Bracket Steeda Spark Plug Gapping Tool (05-07 GT)
Regular Price $99.95
Sale Price $70.30
Regular Price $79.95
Sale Price $74.30
Our Low Price $39.99
Steeda Engraved Black Aluminum Radiator Bracket for 87-93 Steeda Non-Engraved Polished Aluminum Radiator Bracket for 87-93 Steeda Mustang Spark Plug Gapping Tool (05-07 GT) 555-8901
555-0606 Steeda Engraved Black Aluminum Radiator Bracket for 87-93. Add Style & beauty with Steeda's lightweight,  engraved radiator bracket for your 87-93 Mustang. Made right here in the USA. 555-0608 Steeda Non-Engraved Polished Aluminum Radiator Bracket for 87-93. Add Style & beauty with Steeda's lightweight,  engraved radiator bracket for your 87-93 Mustang. Made right here in the USA. Easily adjust your spark plug gap on your 05-07 Mustang GT with Steeda's Spark Plug Gapping Tool. This high quality piece is designed from billet 6061 aluminum, so it'll last a lifetime. It features a built in set screw to allow for fine adjustments.
Steeda Oil Separator (2015 GT) Steeda Adjustable Engine Mounts - Heavy Duty (2015 GT) Steeda Throttle Body Spacer (15 Ecoboost)
Regular Price $99.99
Sale Price $89.99
Regular Price $249.99
Sale Price $209.95
Regular Price $69.99
Sale Price $59.95
Steeda Oil Separator 2015 Mustang GT 555-3711 2015 Mustang GT Steeda Adjustable Engine Mounts - Heavy Duty 555-4039 2015 Mustang Ecoboost Steeda Throttle Body Spacer 555-3195
Steeda's Oil Separator kit for your 2015 Mustang GT is what you need to protect your new engine by collecting and condensing any oil vapors before it has the chance to reach your intake. Steeda's legendary engineers produced this slim oil separator to be as efficient as possible, reduce detonation, all while practically eliminating oil burning and deposits on the valves. This is done by removing oil drawn through the PCV system before it can contaminate the intake charge. It's the perfect upgrade to help protect your engine; but it also helps increase your fuel efficiency, throttle response and overall performance. Ford decided it was a good idea to release the new 2015 Mustang with weak, hydra bushing engine mounts. While they're good for longevity and getting the job done, they are vulnerable to fatigue and sagging, even if you only drive hard once in awhile. Steeda comes to the rescue once again with their heavy duty, adjustable engine mounts for the S-550! These long lasting motor mounts utilize dual durometer bushings which offer superior control, a minimal increase in engine vibration, and way more performance.

Steeda's Motor Mounts are adjustable too, from the factory height up to 3/4" lower. This is perfect if you need a little extra room for other mods, such as a supercharger or a strut tower brace. The high quality billet construction ensures these mounts will last a lifetime. All of Steeda's parts are made right here in the USA! Upgrade your flimsy mounts with the best stuff money can buy.
Increase your Ecoboost's plenum volume to unleash more horsepower all while improving your fuel economy with Steeda's Throttle Body Spacer! If you know Mustang's, you know the legendary Steeda name. You know they build their parts with superior quality and performance. This 6061 Billet Aluminum Throttle Body Spacer installs easily on your turbocharged engine, promoting airflow with its swirl design. By breaking the surface tension of the incoming air, you get more performance, higher MPG's, and increased throttle response. Installation takes less than 15 minutes and is extremely simple. This complete kit includes the spacer, instructions, new gaskets, and mounting hardware.
Steeda Adjustable Engine Mounts - Heavy Duty (2015 Ecoboost) Steeda HD Adjustable Motor Mounts (15 EcoBoost) Steeda S550 Ultra Lite Chassis Jacking Rails (15-16 All)
Regular Price $229.99
Sale Price $219.99
Regular Price $249.95
Sale Price $219.95
Our Low Price $139.95
2015 Mustang Ecoboost Steeda Adjustable Engine Mounts - Heavy Duty 555-4308 555-4038 Steeda HD Adjustable Motor Mounts 2015 EcoBoost Mustang Steeda Chassis Jacking Rails Ultra Lite Pair 15-16
Ford decided it was a good idea to release the new 2015 Mustang with weak, hydra bushing engine mounts. While they're good for longevity and getting the job done, they are vulnerable to fatigue and sagging, even if you only drive hard once in awhile. Steeda comes to the rescue once again with their heavy duty, adjustable engine mounts for the S-550! These long lasting motor mounts utilize dual durometer bushings which offer superior control, a minimal increase in engine vibration, and way more performance.

Steeda's Motor Mounts are adjustable too, from the factory height up to 3/4" lower. This is perfect if you need a little extra room for other mods, such as a supercharger or a strut tower brace. The high quality billet construction ensures these mounts will last a lifetime. All of Steeda's parts are made right here in the USA! Upgrade your flimsy mounts with the best stuff money can buy.
Lets face it, the factory engine mounts are decent but over time they are prone to wear, sagging and failure even with limited hard use. Steeda's Adjustable Heavy Duty Engine Mounts are the solution to all your problems! Not only are these mounts drastically more durable than their OEM counterpart, they are adjustable from the factory height up to 3/4" lower. This gives you extra room for extra mods under your hood!

These long lasting motor mounts utilize super strong dual durometer bushing packages. These red bushings are a bit softer than Steeda's black durometer bushings, giving you superior control with a minimal increase in engine vibration. Stacked with high quality billet aluminum hardware, these mounts will give you years of life. Upgrade for the performance you need with Steeda and Stangmods on your side!

Once again you asked for it and Steeda has delivered! The team at Steeda was asked to come up with a lightweight Jacking Rail system that didn't add a bunch of weight to your 2015-2016 S550 Mustang. Made in-house from the same material we have used to keep Fox Mustangs from flexing for 25+ years, these Jacking Rails feature CAD-designed, laser cut, high-strength steel brackets and stout 2" x 1-1/2" steel tubing.

Powder coated wrinkle black for a low key, yet durable finish, these will last a lifetime under your 2015-2016 S550 Mustang. Unlike the competition, Steeda includes Zinc-plated, flange-headed, grade 10.9 hardware - a simple bolt-in design that can be removed at any time as they use factory mounting holes. These allow you to jack up your Mustang with confidence anywhere along the jacking rail, preventing damage to your factory pinch welds. They provide a great point for jack stands and 2 post lifts. Lastly, these will work with Steeda's IRS Subframe Support Braces without interference. Steeda's new Ultra Lite Chassis Jacking Rails add strength and function to your modern muscle car.

About 15 minutes to install, considered easy, basic tools needed.
Click here for installation instructions