Home > Lights > Tail Lights & Third Brake Lights > 2010-2014 >

  Webelectric Brake Light Pulser for 10-14 Mustangs
Webelectric Brake Light Pulser for 2010+ Mustangs


 
Regular Price $69.95
Sale Price $59.95


Availability: Usually Ships in 24 to 48 Hours
Product Code: 1816
Qty:

Description
 
The BLP-1M10 pulser module can give you the extra measure of safety you need.  These devices are full "Plug-N-Play" harnesses that simply plug into your existing Center High Mount Brake Light.  There are no wires to cut, it is 100% plug-n-play!
Key Product Specs
  • The Ford Mustang goes from 60 to 0 in about 120 feet! Will the driver behind you be ready to stop when you do? The BLP-1M10 pulser module can give you the extra measure of safety you need. These devices are full "Plug-N-Play" harnesses that simply plug into your existing Center High Mount Brake Light. There are no wires to cut, and no adjustments to make. A truly plug-and-play system.



  • The module automatically pulses your third brake light when you apply your brakes. The light will pulsate on and off for about a second, then stay on steady for as long as you press the brake pedal. The unit is designed to create a gentle fluttering of light, so your car is more noticeable, yet it doesn't aggravate the driver behind you. The "Delay-Repeat" circuit means the brake lights have to be off for at least 15 seconds before the cycle can be restarted. So, if you are in bumper-to-bumper traffic, the brake light isn't always pulsing.

    Fits All 2010-2014 Mustangs



Average Customer Review: 5 of 5 | Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
Brake Light Pulser November 3, 2012
Reviewer: Chris Hartley, Jr. from Claxton, GA United States  
Everyone loves the look and it only took 2 minutes to install.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Little mods make a big difference September 8, 2012
Reviewer: Bill Wiebe from NC  
I purchased this mod knowing it was intended for use on 2010+ mustangs. I have a 2003 Mustang GT with a Saleen spoiler and 3rd tail light built into the spoiler.
I was able to modifiey this light Pulser and use it on my 3rd brake light and it works great it only took about 15min to solder in the wires and it sets my mustang apart from others. Thanks Stang Mods for updating with new items even somthing as small as this. I will check your website daily for new items that can make a little difference in an everyday project car.

Was this review helpful to you?


Browse for more products in the same category as this item:

Lights > Tail Lights & Third Brake Lights > 2010-2014