Home > Suspension > Sub Frame Connectors >

  Maximum Motorsports Standard Length Sub-Frame Connectors for 94-04 (bare steel)

Maximum Motorsports Standard Length Sub-Frame Connectors for 79-04 (bare steel)

Our Low Price $129.95
Manufacturer Part # MMSF-3B

Availability: Usually Ships in 1 to 2 Days
Product Code: 00250

Product Information
Product Information
  • All suspension loads go through the front and rear subframes and into the central uni-body structure. The Mustang uni-body bends and flexes because the front and rear subframes of the car are connected by the unsupported and flexible center portion of the floor pan. Maximum Motorsports subframe connectors are welded to the bottom of the uni-body, connecting the front and rear subframes and supplying more structure than is provided by the floor pan alone. This increased structure reduces the amount of bending and twisting in the chassis. Overall, you'll experience a drastic difference in the performance of your Mustang's suspension.

  • Constructed of of 1" x 2" rectangular tubing, with .120" wall thickness - over 40% stiffer than other well-known brands.
  • Rectangular tubing provides more weld area, as well as increased ground clearance, compared to round tubing.
  • The MM connectors have a cross brace used to reinforce the crack-prone area of the floor pan where the seats attach.
  • Bare steel - requires coat of paint or rust inhibitor

    Fits 1994-2004 Mustangs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Suspension > Sub Frame Connectors