You are here: Home > Shop by Manufacturer > MAC > MAC Headers
Sort By:
Page of 1
V6 Mustang Headers from MAC V6 Mustang Chrome Headers from MAC MAC Long Tube V6 Mustang Ceramic Coated Headers MAC Ceramic Coated Long Tube Headers for 96-04 GT
MAC 1 5/8 Direct Fit Ceramic Coated Headers for 05-10 V6
Regular Price $349.95
Sale Price $319.95
MAC 1 5/8 Direct Fit Chrome Plated Headers for 05-10 V6
Regular Price $259.95
Sale Price $239.95
MAC 1 5/8" Ceramic Coated Long Tube Headers for 96-04 GT
Regular Price $529.95
Sale Price $479.95
Installing long tube headers has proven to be a worthwhile modification since the early muscle car days. Adding MAC's long tubes to your modular motor Mustang will net you close to 20 horsepower and the same amount of torque. The stock header manifolds simply do not flow enough for any performance gains. Regain mid to high range torque and power with a set of long tubes from MAC. These headers are ceramic coated for extra thermal absorption. This will keep engine bay temps down which directly relate to more horsepower.
MAC Long Tube V6 Mustang Ceramic Coated Headers MAC Ceramic Coated Long Tube Headers for 99-04 Cobra MAC Ceramic Coated Shorty Headers 1994-1997 3.8 V6 Mustang MAC Ceramic Coated Shorty Headers 2001-2004 3.8 V6 Mustang
MAC 1 5/8" Ceramic Coated Long Tube Headers for 99-00 V6
Regular Price $379.95
Sale Price $359.95
MAC 1 5/8" Ceramic Coated Short Tube Headers (94-97 V6)
Regular Price $349.50
Sale Price $309.99
MAC 1 5/8" Ceramic Coated Short Tube Headers for 01-04 V6
Regular Price $319.95
Sale Price $299.95
Give your V6 Mustang a boost in the performance department with MAC's ceramic coated, shorty headers from StangMods! The direct fit headers will replace your stock manifolds without having to change your mid pipe or any other part. Pick up more power, torque and a deeper exhaust tone.

MAC's header utilize thick, laser cut flanges for a leak free seal. The 1-5/8" diameter tubing is a huge improvement over the factory headers. You'll notice your V6 pulling much harder throughout the entire RPM range. The shorty headers feature a ceramic coating which helps absorb heat much better than the standard chrome finish. In addition, ceramic coating protects the headers from cracking, warping and rust. You'll never have to worry about replacing this part down the road.

MAC's shorty V6 Mustang headers come with new hardware for a complete installation. Header gaskets are not included but recommended if your car has over 60,000 miles. You can find the matching header gaskets to the right of this page.

Fits all 2001-2004 Mustangs
MAC Ceramic Coated Shorty Headers 1999-2000 3.8 V6 Mustang MAC Chrome Coated Long Tube Headers for 96-04 GT MAC Ceramic Coated Long Tube Headers for 99-04 Cobra TF9900 MAC 1 5/8" Long Tube Ceramic Plated Headers for 05-10 V6
MAC 1 5/8" Ceramic Coated Short Tube Headers for 99-00 V6
Regular Price $319.95
Sale Price $299.95
MAC 1 5/8" Chrome Long Tube Headers for 96-04 GT
Regular Price $389.95
Sale Price $379.95
MAC 1 5/8" Long Tube Ceramic Plated Headers for 05-10 V6
Regular Price $429.50
Sale Price $399.95
Installing long tube headers on your Mustang GT will improve exhaust flow for increased horsepower and torque. These MAC 1-5/8" chrome plated headers offer superb value for anyone looking to mod their Stang. MAC has been building exhaust headers for over 30 years and their experience makes them a popular choice for Mustang exhaust parts.
TF2405 MAC 1 5/8 Long Tube Ceramic Headers 05-10 V6. Upgrade your Mustang v6 with long tube headers from MAC. Adding long tube headers will increase power and torque. Upgrade your 2005-2010 V6 Mustang with ceramic plated TF2405 headers.
MAC 1 5/8 Long Tube Chrome Headers 05-10 V6 MAC Long Tube Headers for 94-97 & 01-04 V6 MAC Long Tube Headers for 99-00 V6 Mustang MAC Shorty Headers for 3.8L V6 Mustang 2001-2004
MAC 1 5/8" Long Tube Chrome Plated Headers for 05-10 V6
Regular Price $329.95
Sale Price $299.95
MAC 1 5/8" Long Tube Headers for 94-97 & 01-04 V6
Regular Price $309.95
Sale Price $299.95
MAC 1 5/8" Long Tube Headers for 99-00 V6
Regular Price $309.95
Sale Price $299.95
MAC 1 5/8" Short Tube Headers for 01-04 V6
Regular Price $269.50
Sale Price $239.95
TF3405 MAC 1 5/8 Long Tube Chrome Headers 05-10 V6. Upgrade your Mustang v6 with long tube headers from MAC. Adding long tube headers will increase power and torque. Upgrade your 2005-2010 V6 Mustang with chrome plated TF3405 headers.
MAC Shorty Headers for 3.8L V6 Mustang 1994-1997 MAC Shorty Headers for 3.8L V6 Mustang 1999-2000 Mac Short Tube Ceramic Coated Headers for 05-06 GT MAC 31705 Long Tube Headers 05-10 Mustang GT
MAC 1 5/8" Short Tube Headers for 94-97 V6
Regular Price $249.50
Sale Price $229.95
MAC 1 5/8" Short Tube Headers for 99-00 V6
Regular Price $249.50
Sale Price $229.95
MAC 1-5/8" Shorty Ceramic Coated Headers (05-10 GT)
Regular Price $459.50
Sale Price $429.50
MAC 1-5/8" Shorty Chrome Headers (05-10 GT)
Regular Price $349.50
Sale Price $319.50
Add a significant amount of power and an authoritative sound with MAC's headers for your V6! MAC's headers feature a 1 5/8" design for optimal torque and horsepower increase Industrial plated for longevity Significantly increases Horsepower and torque on your V6 Mustang Comes with all hardware for a complete installation MAC has been building Mustang short tube headers for over 30 years and their shorty, ceramic headers do not disappoint! Each header is expertly manufactured from 16 gauge, mandrel bent steel tubing for uniform exhaust flow throughout. The larger 1-5/8" primaries outflow the stock manifolds for a noticeable increase in horsepower and torque. Squeezing more power out of your 3 Valve 05-10 Mustang GT is easy with MAC's ceramic shorty headers.

MAC's Mustang headers provide performance and functionality for your 3 valve Mustang. MAC's headers utilize a True Fit collector which removes the need for header gaskets. The 2.5" collector utilizes machined steel studs and locking flange nuts to ensure a leak free install! Get horsepower without the hassle by purchasing MAC headers!

These shorty headers feature a special ceramic coating which absorbs heat better than the standard chrome version. Ceramic coated headers will keep engine bay temperatures down which in turn results in more horsepower. Also, the ceramic coating acts as a shield from rust, grime and other elements that can damage your headers over time. Pick up easy horsepower for the life of your Stang with MAC's ceramic coated shorty headers part # 21705.


Fits both automatic and manual transmission 2005-2010 Mustang GT with stock or aftermarket standard length mid pipe

Bolt on easy horsepower and torque to your 3 valve 05-10 Mustang GT with MAC's chrome, shorty headers. These high quality pieces of hardware are manufactured from mandrel bent, steel tubing that feature 1-5/8" primaries. The larger diameter headers outflow the stock manifolds for a noticeable increase in horsepower and torque. The 2.5" collectors ensure these bolt up to your stock or most aftermarket mid pipes.

MAC has been building Mustang exhaust parts for over 30 years. Their experience as a USA based manufacturer ensures you get a high quality part that fits and performs! These headers utilize MAC's exclusive "True Fit" collectors which almost guarantees a leak free seal! In addition, all hardware is included for a proper installation. Bolting on new Mustang headers is a tried and true way to increase horsepower and torque on your 3 valve Mustang GT.

Fits both automatic and manual transmission 2005-2010 Mustang GT

Mac Long Tube Ceramic Coated Headers for 05-06 GT MAC Chrome Mustang Long Tube Headers 05-10 GT 30546 MAC 11-14 Mustang V6 Long Tube Headers Ceramic TF2105 21405 MAC Shorty Headers V6 Mustang Ceramic Coated
MAC 1.75" Long Tube Ceramic Coated Headers (05-10 GT)
Regular Price $549.50
Sale Price $499.50
MAC 1.75" Long Tube Chrome Headers (05-10 GT)
Regular Price $459.50
Sale Price $373.14
MAC Ceramic Coated Long Tube Headers (11-14 V6)
Regular Price $529.50
Sale Price $479.99
MAC Ceramic Coated Short Tube Headers (11-14 V6)
Regular Price $399.50
Sale Price $369.99
Easily bolt on upwards of 25 horsepower with MAC's ceramic coated long tube headers for the 3 valve Mustang GT. The headers feature 1-3/4", mandrel bent primaries that are a huge advantage over the factory manifolds. You'll notice improved horsepower, torque and throttle response throughout the entire RPM range. One of the best modifications any Mustang owner can do is install a set of long tube headers and matching shorty mid pipe. In fact, 5.0 Mustang magazine picked up an additional 42 horsepower with the installation of these headers and MAC's off road prochamber alone!

MAC's high quality headers are built right here in the USA! They feature 16 gauge steel with 3/8" single port flanges for a leak-free seal. The flanges, flange nuts and new studs are all included for an hassle free installation. A new shorty mid pipe and header gaskets are required for installation. Check out your options to the right of this page.

The 20546 headers feature MAC's unique ceramic coating. This special coating absorbs heat which results in cooler engine bay temperatures. We all know cooler air being sucked into your engine equates to more power. In addition to the increased power, the ceramic coating protects the headers from rust and the elements. MAC's ceramic coated Mustang headers are backed by a 3 year limited warranty.

Fits automatic and manual transmission 2005-2010 Mustang GT

Easily bolt on upwards of 25 horsepower with MAC's chrome coated long tube headers for the 3 valve Mustang GT. The headers feature 1-3/4", mandrel bent primaries that are a huge advantage over the factory manifolds. You'll notice improved horsepower, torque and throttle response throughout the entire RPM range. One of the best modifications any Mustang owner can do is install a set of long tube headers and matching shorty mid pipe. In fact, 5.0 Mustang magazine picked up an additional 42 horsepower with the installation of these headers and MAC's off road prochamber alone!

MAC's high quality headers are built right here in the USA! They feature 16 gauge steel with 3/8" single port flanges for a leak-free seal. The flanges, flange nuts and new studs are all included for an hassle free installation. A new shorty mid pipe and header gaskets are required for installation. Check out your options to the right of this page. The 30546 headers feature MAC's standard chrome coating which feature a show-car like shine.

Mustang owners have been bolting on long tube headers for years. It's one of best bang for your buck modifications you can do which guarantees instant power gains. Whether your Stang is set up for the street or strip, you'll benefit from the addition of MAC's long tube header upgrade.


Fits automatic and manual transmission 2005-2010 Mustang GT

MAC has released their long tube header for the 2011-2014 V6 Mustang and these do not disappoint! The headers feature 1-5/8", mandrel bent primaries that are a huge advantage over the factory manifolds. You'll notice improved horsepower, torque and throttle response throughout the entire RPM range.

MAC's high quality headers are built right here in the USA! They feature 16 gauge steel with 3/8" single port flanges for a leak-free seal. The flanges, flange nuts and new studs are all included for an hassle free installation. A new shorty mid pipe and header gaskets are required for installation. Check out your options to the right of this page.

The TF2105 feature MAC's exclusive polished ceramic finish. This special coating first protects the headers against wear and discoloring. Secondly, the ceramic finish absorbs heat more efficiently than standard chrome. Better heat absorption means there is less hot air in your engine bay that is ultimately being sucked down your intake manifold. Cooler air in results in more horsepower and torque!

Fits 2011-2014 Mustang V6 with shorty mid pipe only
MAC's new shorty headers for the 2011-2014 V6 Mustang are a direct bolt on resulting in up to 10 more ponies under the hood. The hallmark of the V6 headers are the 1-5/8" primaries with 2.5" collectors. Mandrel bent tubing ensures a smooth, consistent flow of exhaust gasses. Get increased throttle response and better gas mileage with new shorty headers from MAC.

MAC's high quality headers are built right here in the USA! They feature 16 gauge steel with 3/8" single port flanges for a leak-free seal. The flanges, flange nuts, new studs and header bolts are all included for an hassle free installation. Please note, new header gaskets may be required at the time of installation which are not included.

The part# 21405 headers feature a special ceramic coating that absorbs heat and ensures longevity. By being able to absorb heat, these headers will leave you with cooler engine bay temperatures. Cooler air being sucked down your Mustang's intake manifold translates into more horsepower. Its no secret that heat robs power. Ceramic coating allows you to squeeze the most out of your V6. In addition to the performance advantages, the ceramic coating protects the finish and look of your new headers.

Fits 2011-2014 Mustang V6
MAC 11-14 Mustang V6 Long Tube Headers Chrome TF3105 MAC 11-14 Mustang V6 Shorty Headers Chrome 31405
MAC Chrome Coated Long Tube Headers (11-14 V6)
Regular Price $479.50
Sale Price $429.99
MAC Chrome Coated Short Tube Headers (11-14 V6)
Regular Price $309.50
Sale Price $279.99
MAC has released their long tube header for the 2011-2014 V6 Mustang and these do not disappoint! The headers feature 1-5/8", mandrel bent primaries that are a huge advantage over the factory manifolds. You'll notice improved horsepower, torque and throttle response throughout the entire RPM range.

MAC's high quality headers are built right here in the USA! They feature 16 gauge steel with 3/8" single port flanges for a leak-free seal. The flanges, flange nuts and new studs are all included for an hassle free installation. A new shorty mid pipe and header gaskets are required for installation. Check out your options to the right of this page.

The TF3105 feature a standard chrome coating. This chrome finish adds a show-car shine and some added bling to engine bay of your ride. While not as efficient in heat absorption as the ceramic version, you'll still notice improved throttle response and horsepower/torque throughout the RPM range.

Fits 2011-2014 Mustang V6 with shorty mid pipe only
MAC's new shorty headers for the 2011-2014 V6 Mustang are a direct bolt on resulting in up to 10 more ponies under the hood. The hallmark of the V6 headers are the 1-5/8" primaries with 2.5" collectors. Mandrel bent tubing ensures a smooth, consistent flow of exhaust gasses. Get increased throttle response and better gas mileage with new shorty headers from MAC.

MAC's high quality headers are built right here in the USA! They feature 16 gauge steel with 3/8" single port flanges for a leak-free seal. The flanges, flange nuts, new studs and header bolts are all included for an hassle free installation. Please note, new header gaskets may be required at the time of installation which are not included.

The part# 31405 headers feature a standard chrome coating. This chrome finish adds a show-car shine and some added bling to engine bay of your ride. While not as efficient in heat absorption as the ceramic version, you'll still notice improved throttle response and horsepower/torque throughout the RPM range.

Fits 2011-2014 Mustang V6